Back to the OpenGL extension cross reference
GLX_SGIX_pbuffer
SGIX_pbuffer
Name Strings
GLX_SGIX_pbuffer
Version
$Date: 1997/03/20 02:19:31 $ $Revision: 1.28 $
Number
50
Dependencies
SGIX_FBConfig is required
SGIS_multisample affects the definition of this extension
Overview
This extension defines pixel buffers (GLXPbuffers, or pbuffer for
short). GLXPbuffers are additional non-visible rendering buffers for an
OpenGL renderer. GLXPbuffers are equivalent to GLXPixmaps with the
following exceptions:
1. There is no associated X pixmap. Also, since a GLXPbuffer is a GLX
resource, it may not be possible to render to it using X or an
X extension other than GLX.
2. The format of the color buffers and the type and size of any
associated ancillary buffers for a GLXPbuffer can only be
described with a GLXFBConfig -- an X Visual cannot be used.
3. It is possible to create a GLXPbuffer whose contents may be
asynchronously lost at any time.
4. GLXPbuffers can be rendered to using either direct or indirect
rendering contexts.
5. The allocation of a GLXPbuffer can fail if there are insufficient
resources (i.e., all the pbuffer memory has been allocated and
the implementation does not virtualize pbuffer memory.)
The intent of the pbuffer semantics is to enable implementations to
allocate pbuffers in non-visible frame buffer memory. These
pbuffers are intended to be "static" resources, in that a program
will typically allocate them only once, rather than as a part of its
rendering loop. (But they should be deallocated when the program is
no longer using them -- for example, if the program is iconified.)
The frame buffer resources that are associated with a pbuffer are
also static, and are deallocated only when the pbuffer is destroyed,
or, in the case of a "unpreserved" pbuffer, as a result of X server
activity that changes its frame buffer requirements.
Issues
* Should the optimum width and height be fixed sizes or a multiple?
* Any better names for GLX_BUFFER_CLOBBER_MASK_SGIX, etc?
UM Should we add a command so an application can set the behavior
when a deep window buffer (e.g., depth buffer or multisample buffer)
is clobbered by a pbuffer? The choices would be "preserved" or
"unpreserved".
* When a pbuffer interferes with a window's ancillary buffer should
the action -- swapped or saved -- be specified or left as
implementation dependent?
GLXPbuffer glXCreateGLXPbufferSGIX(Display *dpy,
GLXFBConfig config,
unsigned int width,
unsigned int height,
int *attrib_list);
void glXDestroyGLXPbufferSGIX(Display *dpy,
GLXPbuffer pbuf);
void glXQueryGLXPbufferSGIX(Display *dpy,
GLXPbuffer pbuf,
int attribute,
unsigned int *value);
void glXSelectEventSGIX(Display *dpy,
GLXDrawable drawable,
unsigned long mask);
void glXGetSelectedEventSGIX(Display *dpy,
GLXDrawable drawable,
unsigned long *mask);
Accepted by the <attribute> parameter of glXGetFBConfigAttribSGIX:
GLX_MAX_PBUFFER_WIDTH_SGIX 0x8016
GLX_MAX_PBUFFER_HEIGHT_SGIX 0x8017
GLX_MAX_PBUFFER_PIXELS_SGIX 0x8018
GLX_OPTIMAL_PBUFFER_WIDTH_SGIX 0x8019
GLX_OPTIMAL_PBUFFER_HEIGHT_SGIX 0x801A
Returned by glXGetFBConfigAttribSGIX (when <attribute> is set to
GLX_DRAWABLE_TYPE_SGIX) and accepted by the <attrib_list> parameter of
glXChooseFBConfigSGIX (following the GLX_DRAWABLE_TYPE_SGIX token):
GLX_PBUFFER_BIT_SGIX 0x00000004
Accepted by the <attrib_list> parameter of glXCreateGLXPbufferSGIX
and by the <attribute> parameter of glXQueryGLXPbufferSGIX:
GLX_PRESERVED_CONTENTS_SGIX 0x801B
GLX_LARGEST_PBUFFER_SGIX 0x801C
Accepted by the <attribute> parameter of glXQueryGLXPbufferSGIX:
GLX_WIDTH_SGIX 0x801D
GLX_HEIGHT_SGIX 0x801E
GLX_EVENT_MASK_SGIX 0x801F
Accepted by the <mask> parameter of glXSelectEventSGIX and returned
in the <mask> parameter of glXGetSelectedEventSGIX:
GLX_BUFFER_CLOBBER_MASK_SGIX 0x08000000
Returned in the <event_type> field of a "buffer clobber" event:
GLX_DAMAGED_SGIX 0x8020
GLX_SAVED_SGIX 0x8021
Returned in the <draw_type> field of a "buffer clobber" event:
GLX_WINDOW_SGIX 0x8022
GLX_PBUFFER_SGIX 0x8023
Returned in the <mask> field of a "buffer clobber" event:
GLX_FRONT_LEFT_BUFFER_BIT_SGIX 0x00000001
GLX_FRONT_RIGHT_BUFFER_BIT_SGIX 0x00000002
GLX_BACK_LEFT_BUFFER_BIT_SGIX 0x00000004
GLX_BACK_RIGHT_BUFFER_BIT_SGIX 0x00000008
GLX_AUX_BUFFERS_BIT_SGIX 0x00000010
GLX_DEPTH_BUFFER_BIT_SGIX 0x00000020
GLX_STENCIL_BUFFER_BIT_SGIX 0x00000040
GLX_ACCUM_BUFFER_BIT_SGIX 0x00000080
GLX_SAMPLE_BUFFERS_BIT_SGIX 0x00000100
Additions to Chapter 2 of the 1.0 Specification (OpenGL Operation)
None
Additions to Chapter 3 of the 1.0 Specification (Rasterization)
None
Additions to Chapter 4 of the 1.0 Specification (Per-Fragment Operations
and the Frame buffer)
None
Additions to Chapter 5 of the 1.0 Specification (Special Functions)
None
Additions to Chapter 6 of the 1.0 Specification (State and State Requests)
None
Additions to the GLX Specification
[Add the following to section 3.2.2 on Configuration Management]
[Add to glXGetFBConfigAttribSGIX]:
GLX_MAX_PBUFFER_WIDTH_SGIX and GLX_MAX_PBUFFER_HEIGHT_SGIX indicate the
maximum width and height that can be passed into glXCreateGLXPbufferSGIX and
GLX_MAX_PBUFFER_PIXELS_SGIX indicates the maximum number of pixels (width x
hieght) for a GLXPbuffer. Note that an implementation may return a value for
GLX_MAX_PBUFFER_PIXELS_SGIX that is less than the maximum width times the
maximum height. Also, the value for GLX_MAX_PBUFFER_PIXELS_SGIX is static
and assumes that no other pbuffers or X resources are contending for the
framebuffer memory. Thus it may not be possible to allocate a pbuffer of
the size given by GLX_MAX_PBUFFER_PIXELS_SGIX.
On some implementations, there may be an optimum width and height to use
when allocating a pbuffer. (For example, the implementation may use fixed
size tiles to allocate pbuffers.) Use GLX_OPTIMAL_PBUFFER_WIDTH_SGIX and
GLX_OPTIMAL_PBUFFER_HEIGHT_SGIX to determine this width and height. If the
values are zero then there is no optimal value.
[Add to glXChooseFBConfigSGIX]:
If GLX_OPTIMAL_PBUFFER_WIDTH_SGIX and/or GLX_OPTIMAL_PBUFFER_HEIGHT_SGIX
are specified in <attrib_list> then they are ignored.
[Additions to tables 2 and 3, given in SGIX_FBConfig]
Attribute Type Description
--------- ---- -----------
GLX_BUFFER_SIZE integer depth of the color buffer
GLX_LEVEL integer frame buffer level
GLX_DOUBLEBUFFER boolean True if color buffers have
front/back pairs
GLX_STEREO boolean True if color buffers have
left/right pairs
GLX_AUX_BUFFERS integer number of auxiliary color
buffers
GLX_RED_SIZE integer number of bits of Red if in
RGB mode
GLX_GREEN_SIZE integer number of bits of Green if in
RGB mode
GLX_BLUE_SIZE integer number of bits of Blue if in
RGB mode
GLX_ALPHA_SIZE integer number of bits of Alpha if in
RGB mode
GLX_DEPTH_SIZE integer number of bits in the depth
buffer
GLX_STENCIL_SIZE integer number of bits in the stencil
buffer
GLX_ACCUM_RED_SIZE integer number of bits of Red in the
accumulation buffer
GLX_ACCUM_GREEN_SIZE integer number of bits of Green in the
accumulation buffer
GLX_ACCUM_BLUE_SIZE integer number of bits of Blue in the
accumulation buffer
GLX_ACCUM_ALPHA_SIZE integer number of bits of Alpha in the
accumulation buffer
GLX_SAMPLE_BUFFERS_SGIS integer number of multisample buffers
GLX_SAMPLES_SGIS integer number of samples stored in
each multisample buffer
GLX_X_VISUAL_TYPE_EXT integer X visual type of the
associated visual
GLX_TRANSPARENT_TYPE_EXT enum GLX_NONE_EXT,
TRANSPARENT_RGB_EXT, or
TRANSPARENT_INDEX_EXT
GLX_TRANSPARENT_INDEX_VALUE_EXT integer transparent index value.
GLX_TRANSPARENT_RED_VALUE_EXT color transparent color value.
GLX_TRANSPARENT_GREEN_VALUE_EXT color transparent color value.
GLX_TRANSPARENT_BLUE_VALUE_EXT color transparent color value.
GLX_TRANSPARENT_ALPHA_VALUE_EXT color transparent color value.
GLX_VISUAL_CAVEAT_EXT enum GLX_NONE_EXT or
GLX_SLOW_VISUAL_EXT
GLX_DRAWABLE_TYPE_SGIX bitmask mask indicating which GLX
drawables are supported. Valid
bits are GLX_WINDOW_BIT_SGIX and
GLX_PIXMAP_BIT_SGIX
GLX_RENDER_TYPE_SGIX bitmask mask indicating which OpenGL
rendering modes are supported.
Valid bits are GLX_RGBA_BIT_SGIX
and GLX_COLOR_INDEX_SGIX.
GLX_X_RENDERABLE_SGIX boolean True if X can render to drawable
GLX_MAX_PBUFFER_WIDTH_SGIX integer maximum width of GLXPbuffer
GLX_MAX_PBUFFER_HEIGHT_SGIX integer maximum height of GLXPbuffer
GLX_MAX_PBUFFER_PIXELS_SGIX integer maximum size of GLXPbuffer
GLX_OPTIMAL_PBUFFER_WIDTH_SGIX integer best width to use when
creating pbuffer, or zero if
all widths are equally good.
GLX_OPTIMAL_PBUFFER_HEIGHT_SGIX integer best height to use when creating
pbuffer, or zero if all
heights are equally good.
Table 3: GLX configuration attributes for GLXFBConfigs (Note that
GLX_RGBA and GLX_USE_GL are not supported)
Attribute Default Match Criteria
--------- ------- --------------
GLX_BUFFER_SIZE 0 minimum
GLX_LEVEL 0 exact
GLX_DOUBLEBUFFER don't care exact
GLX_STEREO False exact
GLX_AUX_BUFFERS 0 minimum
GLX_RED_SIZE 0 minimum
GLX_GREEN_SIZE 0 minimum
GLX_BLUE_SIZE 0 minimum
GLX_ALPHA_SIZE 0 minimum
GLX_DEPTH_SIZE 0 minimum
GLX_STENCIL_SIZE 0 minimum
GLX_ACCUM_RED_SIZE 0 minimum
GLX_ACCUM_GREEN_SIZE 0 minimum
GLX_ACCUM_BLUE_SIZE 0 minimum
GLX_ACCUM_ALPHA_SIZE 0 minimum
GLX_SAMPLE_BUFFERS_SGIS 0 minimum
GLX_SAMPLES_SGIS 0 minimum
GLX_X_VISUAL_TYPE_EXT don't care exact
GLX_TRANSPARENT_PIXEL_EXT GLX_NONE_EXT exact
GLX_TRANSPARENT_INDEX_VALUE_EXT don't care exact
GLX_TRANSPARENT_RED_VALUE_EXT don't care exact
GLX_TRANSPARENT_GREEN_VALUE_EXT don't care exact
GLX_TRANSPARENT_BLUE_VALUE_EXT don't care exact
GLX_TRANSPARENT_ALPHA_VALUE_EXT don't care exact
GLX_VISUAL_CAVEAT_EXT don't care exact
GLX_DRAWABLE_TYPE_SGIX GLX_WINDOW_BIT_SGIX minimum
GLX_RENDER_TYPE_SGIX GLX_RGBA_BIT_SGIX minimum
GLX_X_RENDERABLE_SGIX don't care exact
GLX_FBCONFIG_ID_SGIX don't care exact
GLX_MAX_PBUFFER_WIDTH_SGIX 0 minimum
GLX_MAX_PBUFFER_HEIGHT_SGIX 0 minimum
GLX_MAX_PBUFFER_PIXELS_SGIX 0 minimum
GLX_OPTIMAL_PBUFFER_WIDTH_SGIX ignored ignored
GLX_OPTIMAL_PBUFFER_HEIGHT_SGIX ignored ignored
Table 4: Default values and match criteria for GLX configuration
attributes for GLXFBConfigs
[Add the following to section 3.2.3 on Offscreen Rendering]
To create a GLXPbuffer call:
GLXPbuffer glXCreateGLXPbufferSGIX(Display *dpy,
GLXFBConfig config,
unsigned int width,
unsigned int height,
int *attrib_list);
This creates a single GLXPbuffer and returns its XID. <width> and <height>
specify the pixel width and height of the rectangular pbuffer and
<attrib_list> specifies a list of attributes for the pbuffer. Currently
only two attributes can be specified in <attrib_list>:
GLX_PRESERVED_CONTENTS_SGIX and GLX_LARGEST_PBUFFER_SGIX.
<attrib_list> can be either NULL, in which case all the attributes assume
their default values as described below. If it not NULL then its format is
similar to the attribute list paramter of glXChooseFBConfigSGIX: each
attribute is immediately followed by the corresponding desired value and the
list is terminated with None.
Use GLX_LARGEST_PBUFFER_SGIX to get the largest available pbuffer when
the allocation of the pbuffer would otherwise fail. The width or height
of the allocated pbuffer never exceed <width> and <height>,
respectively. Use glXQueryGLXPbufferSGIX to retrieve the dimensions of the
allocated pbuffer. By default, GLX_LARGEST_PBUFFER_SGIX is False.
If the GLX_PRESERVED_CONTENTS_SGIX attribute is set to False in
<attrib_list>, then an "unpreserved" pbuffer is created and the contents
of the pbuffer may be lost at any time. If this attribute is not
specified, or if it is specified as True in <attrib_list>, then when a
resource conflict occurs the contents of the pbuffer will be preserved
(most likely by swapping out portions of the buffer to main memory). In
either case, the client can register to receive a "buffer clobber" event
which is generated when the pbuffer contents have been preserved or have
been damaged. (See the event description.)
The resulting pbuffer will contain color buffers and ancillary as
specified by <config>. Note that pbuffers use framebuffer
resources so applications should consider deallocating them when
they are not in use.
It is possible to create a pbuffer with back buffers and to swap
the front and back buffers by calling glXSwapBuffers. The contents
of the back buffers are undefined after such a swap. (Pbuffers are
the same as windows in this respect.)
Any GLX rendering context created with a GLXFBConfig or X Visual that is
"compatible" with the <config> may be used to render into the pbuffer. (See
description of glXCreateContextWithConfigSGIX, glXMakeCurrent and
glXMakeCurrentReadSGI for definition of "compatible".) If a pbuffer is
created with GLX_PRESERVED_CONTENTS_SGIX set to False, then portion of the
buffer contents may be lost at any time due to frame buffer resource
conflicts. Once the contents of a "non preserved" pbuffer has been lost it
is considered to be in a "damaged" state. It is not an error to render to a
pbuffer that is in this state but the effect of rendering to it is
undefined. It is also not an error to query the pixel contents of such a
pbuffer, but the values of the returned pixels are undefined. Note, that
while this specification allows for non preserved pbuffers to be damaged as
a result of other pbuffer activity, the intent is to only have visible
windows activity "damage" pbuffers.
Since the contents of a "unpreserved" pbuffer can be lost at anytime
with only asynchronous notification (via the "buffer clobber" event), the
only way a client can guarantee that valid pixels are read back with
glReadPixels is by grabbing the X server. (Note that this operation is
potentially expensive and should not be done frequently. Also, since this
locks out other X clients, it should only be done for short periods of
time.) Clients that don't wish to do this can check if the data returned
by glReadPixels is valid by calling XSync and then checking the event
queue for "buffer clobber" events (assuming that these events had been
pulled off of the queue prior to the glReadPixels call).
When glXCreateGLXPbufferSGIX fails to create a GLXPbuffer due to
insufficient resources, a BadAlloc error is generated and None is
returned. If <config> is not a valid GLXFBConfig then a GLXBadFBConfigSGIX
error is generated; if <config> does not support GLXPbuffers then a BadMatch
error is generated.
A GLXPbuffer is destroyed by calling:
void glXDestroyGLXPbufferSGIX(Display *dpy,
GLXPbuffer pbuf);
The GLXPbuffer will be destroyed once it is no longer current to any
client. When a GLXPbuffer is destroyed, any memory resources that are
attached to it are freed, and its XID is made available for reuse.
If <pbuf> is not a valid GLXPbuffer then a GLXBadPbufferSGIX error
is generated.
To query an attribute associated with a GLXPbuffer call
void glXQueryGLXPbufferSGIX(Display* dpy,
GLXPbuffer pbuf,
int attribute,
unsigned int *value);
<attribute> must be set to one of GLX_WIDTH_SGIX, GLX_HEIGHT_SGIX,
GLX_PRESERVED_CONTENTS_SGIX, GLX_LARGEST_PBUFFER_SGIX, or
GLX_FBCONFIG_ID_SGIX.
To get the GLXFBConfig for a GLXPbuffer, first retrieve the i.d. for the
FBConfig and then call glXChooseFBConfigSGIX.
If <pbuf> is not a valid GLXPbuffer then a GLXBadPbufferSGIX error is
generated.
[Add new section, Events]
A client can ask to receive GLX events on a window or GLXPbuffer.
void glXSelectEventSGIX(Display *dpy,
GLXDrawable drawable,
unsigned long mask);
Currently only one GLX event, GLX_BUFFER_CLOBBER_MASK_SGIX, can be selected:
typdef struct {
int event_type; /* GLX_DAMAGED_SGIX or GLX_SAVED_SGIX */
int draw_type; /* GLX_WINDOW_SGIX or GLX_PBUFFER_SGIX */
unsigned long serial; /* # of last request processed by server */
Bool send_event; /* event was generated by a SendEvent request */
Display *display; /* display the event was read from */
GLXDrawable drawable; /* i.d. of Drawable */
unsigned int mask; /* mask indicating which buffers are affected*/
int x, y;
int width, height;
int count; /* if nonzero, at least this many more */
} GLXBufferClobberEventSGIX;
A single X server operation can cause several "buffer clobber" events to be
sent. (e.g., a single pbuffer may be damaged and cause multiple "buffer
clobber" events to be generated). Each event specifies one region of the
GLXDrawable that was affected by the X Server operation. <mask> indicates
which color or ancillary buffers were affected. All the "buffer clobber"
events generated by a single X server action are guaranteed to be contiguous
in the event queue. The conditions under which this event is generated and
the event <type> varies, depending on the type of the GLXDrawable.
For "preserved" pbuffers, a "buffer clobber" event, with <type>
GLX_SAVED_SGIX, is generated whenever the contents of a pbuffer has to be
moved to avoid being damaged. The event(s) describes which portions of the
pbuffer were affected. Clients who receive many "buffer clobber" events,
referring to different save actions, should consider freeing the pbuffer
resource in order to prevent the system from thrashing due to insufficient
resources.
For an "unpreserved" pbuffer a "buffer clobber" event, with <type>
GLX_DAMAGED_SGIX, is generated whenever a portion of the pbuffer becomes
invalid.
For Windows, "buffer clobber" events, with <type> GLX_DAMAGED_SGIX or
GLX_SAVED_SGIX, occur whenever an ancillary buffer, associated with the
window, gets clobbered or moved out of offscreen memory. The event contains
information indicating which color or ancillary buffers, and which
portions of those buffers, were affected.
Calling glXSelectEventSGIX overrides any previous event mask that was set by
the client for <drawable>. Note that a separate event mask is maintained for
each client that requested "clobber events" for <drawable>.
If <drawable> is not a valid GLXPbuffer or a valid Window, a GLXBadDrawable
error is generated.
To find out which GLX events are selected for a window or GLXPbuffer call
void glXGetSelectedEventSGIX(Display *dpy,
GLXDrawable drawable,
unsigned long *mask);
GLX Protocol
Four new GLX protocol commands are added.
CreateGLXPbufferSGIX
1 CARD8 opcode (X assigned)
1 17 GLX opcode (glXVendorPrivateWithReply)
2 8 + 2n request length
4 65543 vendor specific opcode
4 unused
4 CARD32 screen
4 GLX_FBCONFIG fbconfig
4 GLX_PBUFFER pbuffer
4 CARD32 width
4 CARD32 height
8 * n LISTofATTRIB properties
Where n is the number of token/value pairs. Each token value is
either a CARD32, BOOL32, or INT32, followed by an attribute
value which is also either a CARD32, BOOL32, or INT32.
DestroyGLXPbufferSGIX
1 CARD8 opcode (X assigned)
1 17 GLX opcode (glXVendorPrivateWithReply)
2 4 request length
4 65544 vendor specific opcode
4 unused
4 GLX_PBUFFER pbuffer
ChangeDrawableAttributesSGIX
1 CARD8 opcode (X assigned)
1 17 GLX opcode (glXVendorPrivateWithReply)
2 4 + 2*n request length
4 65545 vendor specific opcode
4 unused
4 GLX_DRAWABLE drawable
8 * n LISTofATTRIB properties
Where n is the number of token/value pairs. Each token value is
either a CARD32, BOOL32, or INT32, followed by an attribute
value which is also either a CARD32, BOOL32, or INT32.
GetDrawableAttributesSGIX
1 CARD8 opcode (X assigned)
1 17 GLX opcode (glXVendorPrivateWithReply)
2 4 + 2n request length
4 65546 vendor specific opcode
4 unused
4 GLX_DRAWABLE drawable
=>
1 1 reply
1 unused
2 CARD16 sequence number
4 2*n length
4 CARD32 numAttribs
20 unused
8 * n LISTofATTRIB properties
Where n is the number of token/value pairs. Each token value is
either a CARD32, BOOL32, or INT32, followed by an attribute
value which is also either a CARD32, BOOL32, or INT32.
One new event is added:
BEC is the base event code for the extension, as returned by
QueryExtension.
GLX_BUFFER_CLOBBER_MASK_SGIX
1 BEC+16 code
1 unused
2 CARD16 sequence number
2 CARD16 event_type
0x8017 GLX_DAMAGED_SGIX
0x8018 GLX_SAVED_SGIX
2 CARD16 draw_type
0x8019 GLX_WINDOW_SGIX
0x801A GLX_PBUFFER_SGIX
4 GLX_DRAWABLE drawable
4 BITFIELD mask
2 CARD16 x
2 CARD16 y
2 CARD16 width
2 CARD16 height
2 CARD16 count
6 unused
Dependencies on SGIS_multisample
If SGIS_multisample is not supported, references to
GLX_SAMPLE_BUFFERS_BIT_SGIX in this document are invalid and should be
ignored.
Errors
One new GLX errors is introduced:
GLXBadPbufferSGIX
New State
None
New Implementation Dependent State
None
Implementation Support
List of OpenGL implementations supporting the GLX_SGIX_pbuffer extension
Original File
Original text file for the GLX_SGIX_pbuffer extension
Page generated on Sun Nov 20 18:38:39 2005