# suspend-102716-120927 rhtest mem 4.9.0-rc2Lyude-Test # fwsuspend 0 fwresume 1132901758 [ 143.625424] PM: Syncing filesystems ... [ 143.656029] done. [ 143.656081] PM: Preparing system for sleep (mem) [ 143.657109] Freezing user space processes ... [ 143.661258] (elapsed 0.003 seconds) done. [ 143.661405] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 143.663966] PM: Suspending system (mem) [ 143.664036] Suspending console(s) (use no_console_suspend to debug) [ 143.671441] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 143.673663] [drm:return_to_handler] encoder dpms 30 to mode 3, devices 00000200, active_devices 00000200 [ 143.676051] sd 2:0:0:0: [sda] Stopping disk [ 143.709038] [drm:return_to_handler] force priority to high [ 143.709056] [drm:return_to_handler] force priority to high [ 144.663784] PM: suspend of devices complete after 995.271 msecs [ 144.664513] PM: late suspend of devices complete after 0.722 msecs [ 144.665570] pcieport 0000:00:03.2: System wakeup enabled by ACPI [ 144.666311] ohci-pci 0000:00:14.5: System wakeup enabled by ACPI [ 144.666836] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI [ 144.666976] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI [ 144.667210] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI [ 144.667350] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI [ 144.667830] xhci_hcd 0000:00:10.0: System wakeup enabled by ACPI [ 144.667971] xhci_hcd 0000:00:10.1: System wakeup enabled by ACPI [ 144.679673] PM: noirq suspend of devices complete after 15.153 msecs [ 144.679699] ACPI: Preparing to enter system sleep state S3 [ 145.123619] PM: Saving platform NVS memory [ 145.123645] Disabling non-boot CPUs ... [ 145.125487] smpboot: CPU 1 is now offline [ 145.129833] ACPI: Low-level resume complete [ 145.129897] PM: Restoring platform NVS memory [ 145.129970] LVT offset 0 assigned for vector 0x400 [ 145.130615] Suspended for 13.833 seconds [ 145.130723] Enabling non-boot CPUs ... [ 145.130883] x86: Booting SMP configuration: [ 145.130889] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 145.133244] cache: parent cpu1 should not be sleeping [ 145.134014] CPU1 is up [ 145.134586] ACPI: Waking up from system sleep state S3 [ 145.164754] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI [ 145.164939] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI [ 145.165297] ohci-pci 0000:00:14.5: System wakeup disabled by ACPI [ 145.176229] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI [ 145.176338] xhci_hcd 0000:00:10.1: System wakeup disabled by ACPI [ 145.176576] xhci_hcd 0000:00:10.0: System wakeup disabled by ACPI [ 145.177678] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI [ 145.177810] PM: noirq resume of devices complete after 14.155 msecs [ 145.178431] PM: early resume of devices complete after 0.544 msecs [ 145.179207] rtc_cmos 00:05: System wakeup disabled by ACPI [ 145.180810] pcieport 0000:00:03.2: System wakeup disabled by ACPI [ 145.190223] sd 2:0:0:0: [sda] Starting disk [ 145.216338] r8169 0000:02:00.0 enp2s0: link down [ 145.300133] [drm] PCIE GART of 3857M enabled (table at 0x0000000000040000). [ 145.374452] [drm:return_to_handler] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 145.374463] [drm:return_to_handler] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 145.374490] [drm:return_to_handler] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 145.374500] [drm:return_to_handler] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 145.374527] [drm:return_to_handler] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 145.374537] [drm:return_to_handler] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 145.375993] [drm] ring test on 0 succeeded in 9 usecs [ 145.376854] [drm] ring test on 1 succeeded in 20 usecs [ 145.376902] [drm] ring test on 2 succeeded in 15 usecs [ 145.376916] [drm] ring test on 3 succeeded in 2 usecs [ 145.376929] [drm] ring test on 4 succeeded in 2 usecs [ 145.376943] [drm] ring test on 5 succeeded in 2 usecs [ 145.376957] [drm] ring test on 6 succeeded in 2 usecs [ 145.376971] [drm] ring test on 7 succeeded in 2 usecs [ 145.376985] [drm] ring test on 8 succeeded in 2 usecs [ 145.377105] [drm] ring test on 9 succeeded in 4 usecs [ 145.377119] [drm] ring test on 10 succeeded in 4 usecs [ 145.405135] [drm] ring test on 11 succeeded in 0 usecs [ 145.405149] [drm] UVD initialized successfully. [ 145.487877] ata6: SATA link down (SStatus 0 SControl 300) [ 145.505455] [drm] ring test on 12 succeeded in 12 usecs [ 145.505481] [drm] ring test on 13 succeeded in 2 usecs [ 145.505506] [drm] ring test on 14 succeeded in 2 usecs [ 145.505510] [drm] VCE initialized successfully. [ 145.505591] [drm] ib test on ring 0 succeeded [ 145.505784] [drm] ib test on ring 1 succeeded [ 145.505844] [drm] ib test on ring 2 succeeded [ 145.505905] [drm] ib test on ring 3 succeeded [ 145.505966] [drm] ib test on ring 4 succeeded [ 145.506026] [drm] ib test on ring 5 succeeded [ 145.506086] [drm] ib test on ring 6 succeeded [ 145.506146] [drm] ib test on ring 7 succeeded [ 145.506206] [drm] ib test on ring 8 succeeded [ 145.506252] [drm] ib test on ring 9 succeeded [ 145.506295] [drm] ib test on ring 10 succeeded [ 145.507719] [drm] ib test on ring 11 succeeded [ 145.508016] [drm] ib test on ring 12 succeeded [ 145.508953] [drm:return_to_handler] setting active device to 00000200 from 00000200 00000200 for encoder 2 [ 145.508997] [drm:return_to_handler] [CRTC:32:crtc-0] [ 145.509133] [drm:return_to_handler] encoder dpms 32 to mode 3, devices 00000008, active_devices 00000000 [ 145.509151] [drm:return_to_handler] encoder dpms 32 to mode 3, devices 00000080, active_devices 00000000 [ 145.509169] [drm:return_to_handler] encoder dpms 33 to mode 3, devices 00000400, active_devices 00000000 [ 145.509371] [drm:return_to_handler] force priority to high [ 145.509384] [drm:return_to_handler] force priority to high [ 145.510153] [drm:return_to_handler] 162000 - 162000, pll dividers - fb: 32.4 ref: 4, post 5 [ 145.510505] [drm:dce_v10_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2) [ 145.510511] [drm:return_to_handler] force priority to high [ 145.510525] [drm:return_to_handler] force priority to high [ 145.510711] [drm:return_to_handler] [ENCODER:47:TMDS-47] set [MODE:77:1920x1080] [ 145.510719] [drm:return_to_handler] encoder dpms 30 to mode 3, devices 00000200, active_devices 00000200 [ 145.511172] [drm:return_to_handler] dp_aux_ch flags not zero [ 145.514087] [drm:return_to_handler] 0 [ 145.514220] [drm:return_to_handler] force priority to high [ 145.514233] [drm:return_to_handler] force priority to high [ 145.515196] [drm:return_to_handler] encoder dpms 30 to mode 0, devices 00000200, active_devices 00000200 [ 145.526046] [drm:return_to_handler] clock recovery at voltage 0 pre-emphasis 0 [ 145.528250] [drm:return_to_handler] channel eq at voltage 0 pre-emphasis 0 [ 145.529595] [drm:return_to_handler] encoder dpms 30 to mode 3, devices 00000200, active_devices 00000200 [ 145.564023] [drm:return_to_handler] force priority to high [ 145.564036] [drm:return_to_handler] force priority to high [ 145.565150] [drm:return_to_handler] encoder dpms 32 to mode 3, devices 00000008, active_devices 00000000 [ 145.565170] [drm:return_to_handler] encoder dpms 32 to mode 3, devices 00000080, active_devices 00000000 [ 145.565189] [drm:return_to_handler] encoder dpms 33 to mode 3, devices 00000400, active_devices 00000000 [ 145.565277] [drm:return_to_handler] force priority to high [ 145.565290] [drm:return_to_handler] force priority to high [ 145.566208] [drm:return_to_handler] force priority to high [ 145.566221] [drm:return_to_handler] force priority to high [ 145.567205] [drm:return_to_handler] force priority to high [ 145.567218] [drm:return_to_handler] force priority to high [ 145.568215] [drm:return_to_handler] force priority to high [ 145.568228] [drm:return_to_handler] force priority to high [ 145.569208] [drm:return_to_handler] force priority to high [ 145.569221] [drm:return_to_handler] force priority to high [ 145.570306] [drm:return_to_handler] 0 [ 145.570431] [drm:return_to_handler] force priority to high [ 145.570444] [drm:return_to_handler] force priority to high [ 145.571144] [drm:return_to_handler] encoder dpms 30 to mode 0, devices 00000200, active_devices 00000200 [ 145.581887] [drm:return_to_handler] clock recovery at voltage 0 pre-emphasis 0 [ 145.584008] [drm:return_to_handler] channel eq at voltage 0 pre-emphasis 0 [ 145.585338] [drm:return_to_handler] [CONNECTOR:44:DP-1] status updated from disconnected to disconnected [ 145.585353] [drm:return_to_handler] [CONNECTOR:46:DP-2] status updated from disconnected to disconnected [ 145.585366] [drm:return_to_handler] [CONNECTOR:48:DP-3] status updated from connected to connected [ 145.585379] [drm:return_to_handler] [CONNECTOR:50:HDMI-A-1] status updated from disconnected to disconnected [ 145.585430] [drm:return_to_handler] [ 145.585437] [drm:return_to_handler] [CRTC:32:crtc-0] [FB:78] #connectors=1 (x y) (0 0) [ 145.585453] [drm:return_to_handler] [CONNECTOR:48:DP-3] to [CRTC:32:crtc-0] [ 145.585489] [drm:return_to_handler] 0 [ 145.585636] [drm:return_to_handler] 1 [ 145.585787] [drm:return_to_handler] 2 [ 145.585904] [drm:return_to_handler] 3 [ 145.586021] [drm:return_to_handler] 4 [ 145.586138] [drm:return_to_handler] 5 [ 145.586305] [drm:return_to_handler] 0 [ 145.586423] [drm:return_to_handler] 1 [ 145.586539] [drm:return_to_handler] 2 [ 145.586656] [drm:return_to_handler] 3 [ 145.586804] [drm:return_to_handler] 4 [ 145.586920] [drm:return_to_handler] 5 [ 145.590749] PM: resume of devices complete after 412.340 msecs [ 145.642696] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 145.689278] ata3.00: configured for UDMA/133 [ 145.788708] PM: Finishing wakeup. [ 145.788712] Restarting tasks ... [ 145.792024] done. [ 148.142782] r8169 0000:02:00.0 enp2s0: link up