00:18fdobridge: <gfxstrand> I've tossed around the idea of writing a Maxwell to Turing transpiler.
01:37fdobridge: <rinlovesyou> Isn't there a tool that lets you create vgpus with Nvidia consumer gpus?
08:49fdobridge: <!DodoNVK (she) 🇱🇹> DOOM 2016 now has the vague `mmu fault` message with the assert removwd
08:49fdobridge: <!DodoNVK (she) 🇱🇹> *removed
14:46ilgaz: Are there updated instructions about how to build your own nouveau current to report bugs? There seems to be a regression, nvidia 9400/macbook 5.1 no longer have brightness control. I am just reporting because of health issues.
14:50ilgaz: 'git clone https://github.com/skeggsb/nouveau.git' --> account doesn't exist git doesn't work
15:14RSpliet: ilgaz: well yes, Ben resigned from the project a while ago
15:14RSpliet: I guess the wiki is outdated?
15:21RSpliet: Anyway, I think that "build your own" comment should be interpreted as "run a kernel as close to upstream as possible". Mainly meant for Ubuntu/Debian/"LTS" distro users. If you happen to run Fedora, 6.8.5 is fine.
15:37ilgaz: opensuse-tumbleweed. I remember this happened a while ago in a kernel version and I tried a custom patch. Sorry battery is dead . I will try vanilla kernel and go back 1-2-3 major versions. Thanks RSpliet
18:33fdobridge: <gfxstrand> You could try making the helper clamp if the size is too large.
18:59UrbanMusic: Evening hope your all okay, could I get some info on displayport on a MSi geforce gtx 660 Ti
19:01UrbanMusic: I have used a linux-6.6.26 kernel and the displayport worked using a DP to HDMI cable using gtx's displayport
19:03UrbanMusic: I'm have tried linux-rt-devel-6.8.2-rt11 with as close to same config as possible and I get initial output then as nouveau module loads screen goes black
19:05UrbanMusic: I have tried disable tv out detection, duallink and mst singularly and as group
19:10UrbanMusic: https://pastebin.com/0SPHZNTi is i2c and graphics sections of config-6.6.26
19:15UrbanMusic: and config used in 6.8.2-rt and 6.9.0-rc2-rt1
19:15UrbanMusic: https://pastebin.com/QqPFhNpn
19:20UrbanMusic: I have also used i2cdetect on 6.9-rc2-rt1 and I can see the dp port listed as NV
19:20UrbanMusic: failure seems to be retrieving the edid data but I as yet have not had access to 2nd display device
19:23UrbanMusic: back in 5 just going to reboot to new kernel
20:10UrbanMusic: I see that CONFIG_DRM_SIMPLE_BRIDGE in linux-6.8.2-rt11 was not present in linux-6.6.26 was that added as part of the helper changes
20:30UrbanMusic: reboot try simple_bridge
20:49UrbanMusic: well simple_bridge didn't help it's frustrating when the cable worked on an older kernel and also worked on the closed source driver. I wont use it though on my gtx 660 Ti I find desktop usage is way bettter on nouveau and gpu clocks to 1306Mhz, when NVP driver it sticks at 1013Mhz no matter what edits and tweaks I use. Most important nouveau very very rarely crashes and works with Rt kernels
20:52UrbanMusic: Amazing you good folks get more of my device's power than nvidia. And it sits at 10C lower in temp with less fan noise at higher clocks, than other driver at 1013Mhz just under 300Mhz slower