11:16 fling: nouveau 0000:05:00.0: fifo: fault 00 [READ] at 0000000000931000 engine 00 [GR] client 07 [GPC2/T1_2] reason 02 [PTE] on channel 2 [007f950000 X[15736]]
11:16 fling: can't I recover from this? ^
11:16 fling: Hello.
11:20 fling: can I force reload the module somehow?
12:01 karolherbst: fling: normally killing X should help
12:01 karolherbst: or the application blocking
16:22 fling: karolherbst: killing X helped
16:22 fling: karolherbst: application blocking?
16:22 fling: thnks
18:37 dasabhi: hi, has any one here worked with a decompiler before, inorder to reverse engineer these binaires
18:39 fling: nouveau 0000:05:00.0: fifo: fault 01 [WRITE] at 0000000000931000 engine 00 [GR] client 0f [GPC2/PROP_0] reason 82 [] on channel 2 [007f950000 X[10822]]
18:39 fling: it hangs on urxvt resize ^
18:51 fling: reloading module helped
23:31 biker_rat: I have a Dell Precision M6800 with K3100M card. Nouveau 3d accel on my system seems to need troubleshooting. Can anyone help?
23:34 biker_rat: It blanks to black when I try to run a game & driconf gives a strange error. Glxinfo seems normal. Fan is not speeding up under load. Can change pstate ok. Everything works fine with proprietary driver.
23:35 biker_rat: Proprietary driver blasts the fan under any 3d load, so I want to leave it in wekest pstate until I figure out how to manually blast the fan.
23:36 biker_rat: Is there a way to manually blast the fan by setting some variable?
23:38 biker_rat: "Raising the card performance mode might help. Ask on IRC, #nouveau channel, how to do that. Instructions are not given here, because in the worst case, it may destroy your card, because power management is still a work in progress."
23:39 biker_rat: See above - I did read troubleshooting FAQ.