06:41 karolherbst: mupuf: nearly done with the power sensor calibration stuff :)
06:43 mupuf: what exactly are you doing?
06:44 mupuf: Are you doing it per lane or do you configure all the lanes in the same way, regardless of it sensing anything or not?
06:45 karolherbst: mupuf: I configure each sensor
06:46 karolherbst: I refactored the iccsense subdev a bit to be more flexible
06:58 karolherbst: nice awesome
06:59 karolherbst: mupuf: the read out value varies much less now :)
06:59 karolherbst: fluctuates might be the better word here actually
06:59 karolherbst: 20 out of 40 readings are 11.19W the other 11.18W :)
07:02 mupuf: nice!
07:02 mupuf: what is the aggregation time now?
07:02 karolherbst: minimum possible
07:02 karolherbst: I use the same config like the blob does
07:02 karolherbst: 140µs for bus and shunt
07:02 karolherbst: 1024 samples
07:03 karolherbst: continous
07:03 karolherbst: I expect that the sensor just reuse samples
07:03 karolherbst: or has some smart weightning
07:03 karolherbst: anyway, gpu power consumption is at 8.93W now :)
07:03 karolherbst: idle at 07
07:04 karolherbst: blob at 8.44W
07:04 karolherbst: pretty close already
07:05 karolherbst: same voltage both drivers
07:05 karolherbst: or wait...
07:05 karolherbst: I tested without my voltage fixes
07:05 karolherbst: oh well
07:21 mupuf: karolherbst: so, 140ms average
07:21 mupuf: that's a tad high when one samples at 10 Hz, but better too much averaging than too little :D
07:21 karolherbst: yeah
07:21 karolherbst: it works quite well though
07:22 karolherbst: now I have to check what nvidia does on the ina219
07:22 karolherbst: because there it is a bit different
09:12 karolherbst: mupuf: when you get home, can you plug your nvc8?
09:47 mupuf: hmm
09:47 mupuf: ok, I will go back home before going out
09:47 mupuf: we are having a long week end in finland (4 days), I plan on spending some time on nouveau :)
09:48 karolherbst: awesome :)
09:48 karolherbst: I think I will send out the sensor stuff out today too after I looked at the nvc8
09:49 karolherbst: mupuf: by the way, the one guy managed to get 3 4K screens working with nouveau, no idea if read the logs
09:50 mupuf: oh, cool, what was the real problem? Memory bw?
09:50 karolherbst: well this was only a performance problem
09:50 karolherbst: but hotplugging the HDMI display didn't work
09:50 karolherbst: but booting with all three worked
09:51 karolherbst: but yeah. glxgears fullscreen like 58fps :D
09:56 mupuf: so, what did he fix in the end? He realized that booting with them plugged worked better>
09:56 mupuf: ?
09:59 karolherbst: yeah
09:59 karolherbst: I guess there might be some error while hotplugging a display
09:59 karolherbst: I think he got ad EDID related error on hotplugging
11:16 mupuf: karolherbst: plugged
11:16 mupuf: see you tommorow!
11:34 linkmauve1: I’m not sure it’s related, but I started weston in tty2 and now whenever I try to go back to Xorg in tty1 I get “[10188.462747] nouveau: evo channel stalled”.
11:34 linkmauve1: Is there a way to VT switch back to it?
11:39 Yoshimo: karolherbst: i guess https://bugs.freedesktop.org/show_bug.cgi?id=94650 should cover my texture issues as well,shouldn't it?
11:42 karolherbst: mupuf: thanks
11:43 karolherbst: Yoshimo: did you also tried to play oblivion?
11:43 karolherbst: ohh wait
11:43 karolherbst: it was wow
11:43 linkmauve1: Oh btw, I’m on a 9xx GPU so no hardware acceleration, but just modesetting is enough for me.
11:43 karolherbst: mhh
11:43 karolherbst: it might a different issue though
11:43 Yoshimo: yes, and you said it looked similar to your problem
11:43 karolherbst: yeah maybe it is the same, maybe not
11:43 karolherbst: you should open another bug though
11:43 karolherbst: but how went forcing gl 4.1 by the way?
11:44 Yoshimo: not well, it still crashed as if i hadn't forced anything
15:53 biker_rat: Can anyone tell me how to get reclocking working for GTX 650?
16:02 jsnlry1: Hi, I have a problem with my Nvidia card on my HP 8440p: After resuming from standby I only see a blank screen. I already explained my problem here: https://bbs.archlinux.org/viewtopic.php?pid=1614883 (the screenshot is outdated, at the moment the screen is white after resume). Any idea what I could do to fix this problem?
16:46 RSpliet: biker_rat: without generalisation, I think some fixes for, well, at least my, GTX650 are somewhere in the pipeline
16:46 RSpliet: oh
16:47 RSpliet: jsnlry1: I have issues with suspend/resume on GT218 as well unfortunately
16:47 RSpliet: never got round diving into it, but it might be helpful providing your kernel version as well
23:34 Gorka: hey! i'm looking for hardware accel. on GTX 960 and i've seen that newest nouveau has it
23:35 Gorka: do i need kernel 4.6 too?
23:36 Gorka: i have mesa-git already