06:50anholt: https://gitlab.freedesktop.org/anholt/mesa/-/jobs/18025382#L1525 well that's a different failure, at least.
06:53imirkin: yay, much success. you're now getting hangs :)
06:53imirkin: 22-01-25 06:49:11 [ 8.885131] WARNING: CPU: 1 PID: 160 at drivers/gpu/drm/nouveau/nvkm/falcon/v1.c:247 nvkm_falcon_v1_wait_for_halt+0xf0/0x10c [nouveau]
06:54imirkin: in case it's not immediately apparent to you what that means
06:55imirkin: that means it's trying to load the firmware, and failing
06:55imirkin: falcon = the "cpu" inside the GPU which runs ... well, firmware
06:56anholt: presumably due to the fault just above it, but question is why.
06:58imirkin: i'd be lying if i said i had any clue :)
06:58imirkin: going under the general assumption of "it's not completely busted", perhaps you missed some stupid power/whatever driver
06:58anholt: using firmware from debian buster's firmware-linux-nonfree
06:58anholt: this kernel config had worked before, locally, but we're on a newer kernel now.
06:59imirkin: oh, nevermind
06:59imirkin: so ...
06:59imirkin: your firmware seems weird
06:59imirkin: i think the code _might_ handle that, but i think it might be the old layout:
07:00imirkin: anholt: this is what i have: https://www.toptal.com/developers/hastebin/koledegibi.yaml
07:00anholt: are you looking at the wget near the top of the log? that's leftover fail debug, the bits that got loaded are from the container.
07:01imirkin: + tar --zstd -xvf data.tar.zst
07:01anholt: looks like the firmware in firmware-linux hasn't been updated in ages, so it's not a version
07:01anholt: yeah, ignore the tar --zstd area, those files didn't get loaded
07:01imirkin: + mv lib/firmware/gm20b lib/firmware/tegra21x /rootfs-arm64/lib/firmware/nvidia/
07:01imirkin: looks like they do get copied in?
07:03anholt: yeah, that's leftover attempts to get tegra firmwares in, but those don't get used. I went with baking it into the container once i found out it was already in firmware-linux, and the next build that GCs the old stuff is going to be https://gitlab.freedesktop.org/anholt/mesa/-/jobs/18025424
07:14imirkin: yeah ... i just know how to load nouveau on x86
07:22imirkin: afaik karolherbst has gotten jetson nano to work (after some initial troubles as well iirc)
07:22imirkin: hopefully he can share
07:37anholt: oh, wait. gr: firmware unavailable
07:37anholt: anyway, time for sleep
13:22karolherbst: imirkin, anholt: the jetson should just work as long as your windoing system is modifier aware
13:23karolherbst: but could be that something broke again
13:23karolherbst: but yeah.. you need firmware
13:24karolherbst: anholt: also it makes sense to flash the updated uefi firmware so you don't have to deal with this dts bs
14:35imirkin: karolherbst: he's not making it far enough for windowing system to care
14:35imirkin: it's failing in the gpu bringup
14:46imirkin: mynacol: thanks for sending that info along!
14:47imirkin: i will check it tonight-ish
14:47mynacol: imirkin: Thank you!
14:47imirkin: but based on your description, you did everything right
14:49mynacol: imirkin: I forgot to mention that I run a development version of mesa with the changes of karolherbst's MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10752/
14:49imirkin: mynacol: ok. that shouldn't really affect stuff like that either way.
14:49imirkin: either the firmware hangs or it doesn't :)