nm-settings-ifcfg-rh

nm-settings-ifcfg-rh — Description of ifcfg-rh settings plugin

Description

NetworkManager is based on the concept of connection profiles that contain network configuration (see nm-settings(5) for details). The profiles can be stored in various formats. NetworkManager uses plugins for reading and writing the data. The plugins can be configured in NetworkManager.conf(5).

The ifcfg-rh plugin is used on the Fedora and Red Hat Enterprise Linux distributions to read/write configuration from/to the traditional /etc/sysconfig/network-scripts/ifcfg-* files. Each NetworkManager connection maps to one ifcfg-* file, with possible usage of keys-* for passwords, route-* for static IPv4 routes and route6-* for static IPv6 routes. The plugin currently supports reading and writing Ethernet, Wi-Fi, InfiniBand, VLAN, Bond, Bridge, and Team connections. Unsupported connection types (such as WWAN, PPPoE, VPN, or ADSL) are handled by keyfile plugin (nm-settings-keyfile(5)). The main reason for using ifcfg-rh plugin is the compatibility with legacy configurations for ifup and ifdown (initscripts).

File Format

The ifcfg-rh config format is a simple text file containing VARIABLE="value" lines. The format is described in sysconfig.txt of initscripts package. Note that the configuration files may be sourced by initscripts, so they must be valid shell scripts. That means, for instance, that # character can be used for comments, strings with spaces must be quoted, special characters must be escaped, etc.

Users can create or modify the ifcfg-rh connection files manually, even if that is not the recommended way of managing the profiles. However, if they choose to do that, they must inform NetworkManager about their changes (see monitor-connection-file in nm-settings(5), and nmcli con (re)load).

Some ifcfg-rh configuration examples: 

Simple DHCP ethernet configuration:
NAME=ethernet
UUID=1c4ddf70-01bf-46d6-b04f-47e842bd98da
TYPE=Ethernet
BOOTPROTO=dhcp
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
ONBOOT=yes
            
Simple ethernet configuration with static IP:
TYPE=Ethernet
BOOTPROTO=none
IPADDR=10.1.0.25
PREFIX=24
GATEWAY=10.1.0.1
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
IPV6_FAILURE_FATAL=no
NAME=ethernet-em2
UUID=51bb3904-c0fc-4dfe-83b2-0a71e7928c13
DEVICE=em2
ONBOOT=yes
            
WPA2 Enterprise WLAN (TTLS with inner MSCHAPV2 authentication):
ESSID="CompanyWLAN"
MODE=Managed
KEY_MGMT=WPA-EAP
TYPE=Wireless
IEEE_8021X_EAP_METHODS=TTLS
IEEE_8021X_IDENTITY=joe
IEEE_8021X_PASSWORD_FLAGS=ask
IEEE_8021X_INNER_AUTH_METHODS=MSCHAPV2
IEEE_8021X_CA_CERT=/home/joe/.cert/company.crt
BOOTPROTO=dhcp
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=no
NAME=MyCompany
UUID=f79848ff-11a6-4810-9e1a-99039dea84c4
ONBOOT=yes
            
Bridge and bridge port configuration:
ifcfg-bridge:                                ifcfg-bridge-port:
NAME=bridge                                  NAME=bridge007-port-eth0
UUID=4be99ce0-c5b2-4764-8b77-ec226e440125    UUID=3ad56c4a-47e1-419b-b0d4-8ad86eb967a3
DEVICE=bridge007                             DEVICE=eth0
STP=yes                                      ONBOOT=yes
TYPE=Bridge                                  TYPE=Ethernet
BRIDGING_OPTS=priority=32768                 BRIDGE=bridge007
ONBOOT=yes
BOOTPROTO=dhcp

            
Bonding configuration:
ifcfg-BOND:                                  ifcfg-BOND-slave:
NAME=BOND                                    NAME=BOND-slave
UUID=b41888aa-924c-450c-b0f8-85a4f0a51b4a    UUID=9bb048e4-286a-4cc3-b104-007dbd20decb
DEVICE=bond100                               DEVICE=eth0
BONDING_OPTS="mode=balance-rr miimon=100"    ONBOOT=yes
TYPE=Bond                                    TYPE=Ethernet
BONDING_MASTER=yes                           MASTER=bond100
ONBOOT=yes                                   SLAVE=yes
BOOTPROTO=dhcp

            
Team and team port configuration:
ifcfg-my_team0:
DEVICE=team0
TEAM_CONFIG="{ \"device\": \"team0\", \"runner\": {\"name\": \"roundrobin\"}, \"ports\": {\"eth1\": {}, \"eth2\": {}} }"
DEVICETYPE=Team
BOOTPROTO=dhcp
NAME=team0-profile
UUID=1d3460a0-7b37-457f-a300-fe8d92da4807
ONBOOT=yes

ifcfg-my_team0_slave1:
NAME=team0-slave1
UUID=d5aed298-c567-4cc1-b808-6d38ecef9e64
DEVICE=eth1
ONBOOT=yes
TEAM_MASTER=team0
DEVICETYPE=TeamPort

ifcfg-my_team0_slave2:
NAME=team0-slave2
UUID=94e75f4e-e5ad-401c-8962-31e0ae5d2215
DEVICE=eth2
ONBOOT=yes
TEAM_MASTER=team0
DEVICETYPE=TeamPort
            

The UUID values in the config files must be unique. You can use uuidgen command line tool to generate such values. Alternatively, you can leave out UUID entirely. In that case NetworkManager will generate a UUID based on the file name.

Differences against initscripts

The main differences of NetworkManager ifcfg-rh plugin and traditional initscripts are:

NM_CONTROLLED=yes|no

NM_CONTROLLED is NetworkManager-specific variable used by NetworkManager for determining whether the device of the ifcfg file should be managed. NM_CONTROLLED=yes is supposed if the variable is not present in the file. Note that if you have more ifcfg files for a single device, NM_CONTROLLED=no in one of the files will cause the device not to be managed. The profile may not even be the active one.

New variables

NetworkManager has introduced some new variable, not present in initscripts, to be able to store data for its new features. The variables are marked as extensions in the tables below.

Semantic change of variables

NetworkManager had to slightly change the semantic for a few variables.

  • PEERDNS - initscripts interpret PEERDNS=no to mean "never touch resolv.conf". NetworkManager interprets it to say "never add automatic (DHCP, PPP, VPN, etc.) nameservers to resolv.conf".

  • ONBOOT - initscripts use ONBOOT=yes to mark the devices that are to be activated during boot. NetworkManager extents this to also mean that this profile can be used for auto-connecting at any time.

  • BOOTPROTO - NetworkManager supports traditional values none (static), dhcp. But it also allows additional values to enable new addressing methods. They are autoip for IPv4 link-local addressing using Avahi daemon and shared for connection sharing. When shared is used, NetworkManager assigns the interface 10.42.0.1, or it uses the first static address, if configured.

See the next section for detailed mapping of NetworkManager properties and ifcfg-rh variables. Variable names, format and usage differences in NetworkManager and initscripts are documented in the tables below.

Details

ifcfg-rh plugin variables marked with (+) are NetworkManager specific extensions not understood by traditional initscripts.

Table 62. 802-1x setting

Property Ifcfg-rh Variable Default Description
eap IEEE_8021X_EAP_METHODS(+)   EAP method for 802.1X authentication. Example: IEEE_8021X_EAP_METHODS=PEAP Allowed values: "LEAP", "PWD", "TLS", "PEAP", "TTLS", "FAST"
identity IEEE_8021X_IDENTITY(+)   Identity for EAP authentication methods. Example: IEEE_8021X_IDENTITY=itsme
anonymous-identity IEEE_8021X_ANON_IDENTITY(+)   Anonymous identity for EAP authentication methods.
pac-file IEEE_8021X_PAC_FILE(+)   File with PAC (Protected Access Credential) for EAP-FAST. Example: IEEE_8021X_PAC_FILE=/home/joe/my-fast.pac
ca-cert IEEE_8021X_CA_CERT(+)   CA certificate for EAP. Example: IEEE_8021X_CA_CERT=/home/joe/cacert.crt
ca-path (none)   The property is not handled by ifcfg-rh plugin.
subject-match IEEE_8021X_SUBJECT_MATCH(+)   Substring to match subject of server certificate against. Example: IEEE_8021X_SUBJECT_MATCH="Red Hat"
altsubject-matches IEEE_8021X_ALTSUBJECT_MATCHES(+)   List of strings to be matched against the altSubjectName. Example: IEEE_8021X_ALTSUBJECT_MATCHES="s1.domain.cc"
domain-suffix-match IEEE_8021X_DOMAIN_SUFFIX_MATCH(+)   Suffix to match domain of server certificate against.
client-cert IEEE_8021X_CLIENT_CERT(+)   Client certificate for EAP. Example: IEEE_8021X_CLIENT_CERT=/home/joe/mycert.crt
phase1-peapver IEEE_8021X_PEAP_VERSION(+)   Use to force a specific PEAP version. Allowed values: 0, 1
phase1-peaplabel IEEE_8021X_PEAP_FORCE_NEW_LABEL(+) no Use to force the new PEAP label during key derivation. Allowed values: yes, no
phase1-fast-provisioning IEEE_8021X_FAST_PROVISIONING(+)   Enable in-line provisioning of EAP-FAST credentials. Example: IEEE_8021X_FAST_PROVISIONING="allow-auth allow-unauth" Allowed values: space-separated list of these values [allow-auth, allow-unauth]
phase2-auth IEEE_8021X_INNER_AUTH_METHODS(+)   Inner non-EAP authentication methods. IEEE_8021X_INNER_AUTH_METHODS can contain values both for 'phase2-auth' and 'phase2-autheap' properties. Example: IEEE_8021X_INNER_AUTH_METHODS=PAP Allowed values: "PAP", "CHAP", "MSCHAP", "MSCHAPV2", "GTC", "OTP", "MD5" and "TLS"
phase2-autheap IEEE_8021X_INNER_AUTH_METHODS(+)   Inner EAP-based authentication methods. Note that IEEE_8021X_INNER_AUTH_METHODS is also used for 'phase2-auth' values. Example: IEEE_8021X_INNER_AUTH_METHODS="MSCHAPV2 EAP-TLS" Allowed values: "EAP-MD5", "EAP-MSCHAPV2", "EAP-GTC", "EAP-OTP" and "EAP-TLS"
phase2-subject-match IEEE_8021X_PHASE2_SUBJECT_MATCH(+)   Substring to match subject of server certificate against. Example: IEEE_8021X_PHASE2_SUBJECT_MATCH="Red Hat"
phase2-altsubject-matches IEEE_8021X_PHASE2_ALTSUBJECT_MATCHES(+)    
phase2-domain-suffix-match IEEE_8021X_PHASE2_DOMAIN_SUFFIX_MATCH(+)   Suffix to match domain of server certificate for phase 2 against.
phase2-client-cert IEEE_8021X_INNER_CLIENT_CERT(+)   Client certificate for inner EAP method. Example: IEEE_8021X_INNER_CLIENT_CERT=/home/joe/mycert.crt
password IEEE_8021X_PASSWORD(+)   UTF-8 encoded password used for EAP. It can also go to "key-" lookaside file, or it can be owned by a secret agent.
password-flags IEEE_8021X_PASSWORD_FLAGS(+)   Password flags for IEEE_8021X_PASSWORD password. (see the section called “Secret flag types:” for _FLAGS values)
password-raw (none)   The property is not handled by ifcfg-rh plugin.
password-raw-flags (none)   The property is not handled by ifcfg-rh plugin.
private-key IEEE_8021X_PRIVATE_KEY(+)   Private key for EAP-TLS. Example: IEEE_8021X_PRIVATE_KEY=/home/joe/mykey.p12
private-key-password IEEE_8021X_PRIVATE_KEY_PASSWORD(+)   Password for IEEE_8021X_PRIVATE_KEY. It can also go to "key-" lookaside file, or it can be owned by a secret agent.
private-key-password-flags IEEE_8021X_PRIVATE_KEY_PASSWORD_FLAGS(+)   Password flags for IEEE_8021X_PRIVATE_KEY_PASSWORD password. (see the section called “Secret flag types:” for _FLAGS values)
phase2-private-key IEEE_8021X_INNER_PRIVATE_KEY(+)   Private key for inner authentication method for EAP-TLS.
phase2-private-key-password IEEE_8021X_INNER_PRIVATE_KEY_PASSWORD(+)   Password for IEEE_8021X_INNER_PRIVATE_KEY. It can also go to "key-" lookaside file, or it can be owned by a secret agent.
phase2-private-key-password-flags IEEE_8021X_INNER_PRIVATE_KEY_PASSWORD_FLAGS(+)   Password flags for IEEE_8021X_INNER_PRIVATE_KEY_PASSWORD password. (see the section called “Secret flag types:” for _FLAGS values)
pin (none)   The property is not handled by ifcfg-rh plugin.
pin-flags (none)   The property is not handled by ifcfg-rh plugin.
system-ca-certs (none)   The property is not handled by ifcfg-rh plugin.

Table 63. bond setting

Property Ifcfg-rh Variable Default Description
options BONDING_OPTS   Bonding options. Example: BONDING_OPTS="miimon=100 mode=broadcast"

Table 64. bridge-port setting

Property Ifcfg-rh Variable Default Description
priority BRIDGING_OPTS: priority= 32 STP priority. Allowed values: 0 - 63
path-cost BRIDGING_OPTS: path_cost= 100 STP cost. Allowed values: 1 - 65535
hairpin-mode BRIDGING_OPTS: hairpin_mode= yes Hairpin mode of the bridge port.

Table 65. bridge setting

Property Ifcfg-rh Variable Default Description
mac-address MACADDR(+)   MAC address of the bridge. Note that this requires a recent kernel support, originally introduced in 3.15 upstream kernel) MACADDR for bridges is an NM extension.
stp STP no Span tree protocol participation.
priority BRIDGING_OPTS: priority= 32768 STP priority. Allowed values: 0 - 32768
forward-delay DELAY 15 STP forwarding delay. Allowed values: 2 - 30
hello-time BRIDGING_OPTS: hello_time= 2 STP hello time. Allowed values: 1 - 10
max-age BRIDGING_OPTS: max_age= 20 STP maximum message age. Allowed values: 6 - 40
ageing-time BRIDGING_OPTS: ageing_time= 300 Ethernet MAC ageing time. Allowed values: 0 - 1000000
multicast-snooping BRIDGING_OPTS: multicast_snooping= 1 IGMP snooping support. Allowed values: 0 or 1

Table 66. connection setting

Property Ifcfg-rh Variable Default Description
id NAME(+)   User friendly name for the connection profile.
uuid UUID(+)   UUID for the connection profile. When missing, NetworkManager creates the UUID itself (by hashing the file).
interface-name DEVICE   Interface name of the device this profile is bound to. The variable can be left out when the profile should apply for more devices. Note that DEVICE can be required for some connection types.
type TYPE (DEVICETYPE, DEVICE)   Base type of the connection. DEVICETYPE is used for teaming connections. Example: TYPE=Ethernet; TYPE=Bond; TYPE=Bridge; DEVICETYPE=TeamPort Allowed values: Ethernet, Wireless, InfiniBand, Bridge, Bond, Vlan, Team, TeamPort
permissions USERS(+)   USERS restrict the access for this conenction to certain users only. Example: USERS="joe bob"
autoconnect ONBOOT yes Whether the connection should be autoconnected (not only while booting).
autoconnect-priority AUTOCONNECT_PRIORITY(+) 0 Connection priority for automatic activation. Connections with higher numbers are preferred when selecting profiles for automatic activation. Example: AUTOCONNECT_PRIORITY=20 Allowed values: -999 to 999
zone ZONE(+)   Trust level of this connection. The string is usually used for a firewall. Example: ZONE=Work
master MASTER, TEAM_MASTER, BRIDGE   Reference to master connection. The variable used depends on the connection type.
slave-type MASTER, TEAM_MASTER, DEVICETYPE, BRIDGE   Slave type doesn't map directly to a variable, but it is recognized using different variables. MASTER for bonding, TEAM_MASTER and DEVICETYPE for teaming, BRIDGE for bridging.
autoconnect-slaves AUTOCONNECT-SLAVES(+) missing variable means global default Whether slaves of this connection should be auto-connected when this connection is activated.
secondaries SECONDARY_UUIDS(+)   UUID of VPN connections that should be activated together with this connection.
gateway-ping-timeout GATEWAY_PING_TIMEOUT(+) 0 If greater than zero, the IP connectivity will be checked by pinging the gateway and waiting for the specified timeout (in seconds). Example: GATEWAY_PING_TIMEOUT=5
metered CONNECTION_METERED   Whether the device is metered Example: CONNECTION_METERED=yes Allowed values: yes,no,unknown
lldp LLDP missing variable means global default whether LLDP is enabled for the connection Example: LLDP=no Allowed values: boolean value or 'rx'

Table 67. dcb setting

Property Ifcfg-rh Variable Default Description
app-fcoe-flags DCB_APP_FCOE_ENABLE, DCB_APP_FCOE_ADVERTISE, DCB_APP_FCOE_WILLING no FCOE flags. Example: DCB_APP_FCOE_ENABLE=yes DCB_APP_FCOE_ADVERTISE=yes
app-fcoe-priority DCB_APP_FCOE_PRIORITY   Priority of FCoE frames. Allowed values: 0 - 7
app-fcoe-mode DCB_APP_FCOE_MODE fabric FCoE controller mode. Allowed values: fabric, vn2vn
app-iscsi-flags DCB_APP_ISCSI_ENABLE, DCB_APP_ISCSI_ADVERTISE, DCB_APP_ISCSI_WILLING no iSCSI flags.
app-iscsi-priority DCB_APP_ISCSI_PRIORITY   Priority of iSCSI frames. Allowed values: 0 - 7
app-fip-flags DCB_APP_FIP_ENABLE, DCB_APP_FIP_ADVERTISE, DCB_APP_FIP_WILLING no FIP flags.
app-fip-priority DCB_APP_FIP_PRIORITY   Priority of FIP frames. Allowed values: 0 - 7
priority-flow-control-flags DCB_PFC_ENABLE, DCB_PFC_ADVERTISE, DCB_PFC_WILLING no Priority flow control flags.
priority-flow-control DCB_PFC_UP   Priority flow control values. String of 8 "0" and "1", where "0". means "do not transmit priority pause", "1" means "transmit pause". Example: DCB_PFC_UP=01101110
priority-group-flags DCB_PG_ENABLE, DCB_PG_ADVERTISE, DCB_PG_WILLING no Priority groups flags.
priority-group-id DCB_PG_ID   Priority groups values. String of eight priorities (0 - 7) or "f" (unrestricted). Example: DCB_PG_ID=1205f173
priority-group-bandwidth DCB_PG_PCT   Priority groups values. Eight bandwidths (in percent), separated with commas. Example: DCB_PG_PCT=10,5,10,15,10,10,10,30
priority-bandwidth DCB_PG_UPPCT   Priority values. Eight bandwidths (in percent), separated with commas. The sum of the numbers must be 100. Example: DCB_PG_UPPCT=7,13,10,10,15,15,10,20
priority-strict-bandwidth DCB_PG_STRICT   Priority values. String of eight "0" or "1", where "0" means "may not utilize all bandwidth", "1" means "may utilize all bandwidth". Example: DCB_PG_STRICT=01101110
priority-traffic-class DCB_PG_UP2TC   Priority values. String of eight trafic class values (0 - 7). Example: DCB_PG_UP2TC=01623701

All DCB related configuration is a NetworkManager extension. DCB=yes must be used explicitly to enable DCB so that the rest of the DCB_* variables can apply.

Table 68. infiniband setting

Property Ifcfg-rh Variable Default Description
mac-address HWADDR   IBoIP 20-byte hardware address of the device (in traditional hex-digits-and-colons notation). Example: HWADDR=01:02:03:04:05:06:07:08:09:0A:01:02:03:04:05:06:07:08:09:11
mtu MTU   MTU of the interface.
transport-mode CONNECTED_MODE CONNECTED_MODE=no CONNECTED_MODE=yes for "connected" mode, CONNECTED_MODE=no for "datagram" mode
p-key PKEY_ID (and PKEY=yes) PKEY=no InfiniBand P_Key. The value can be a hex number prefixed with "0x" or a decimal number. When PKEY_ID is specified, PHYSDEV and DEVICE also must be specified. Example: PKEY=yes PKEY_ID=2 PHYSDEV=mlx4_ib0 DEVICE=mlx4_ib0.8002
parent PHYSDEV (PKEY=yes) PKEY=no InfiniBand parent device. Example: PHYSDEV=ib0

Table 69. ip-tunnel setting

Property Ifcfg-rh Variable Default Description

Table 70. ipv4 setting

Property Ifcfg-rh Variable Default Description
method BOOTPROTO none Method used for IPv4 protocol configuration. Allowed values: none, dhcp (bootp), static, ibft, autoip, shared
dns DNS1, DNS2, ...   List of DNS servers. Even if NetworkManager supports many DNS servers, initscripts and resolver only care about the first three, usually. Example: DNS1=1.2.3.4 DNS2=10.0.0.254 DNS3=8.8.8.8
dns-search DOMAIN   List of DNS search domains.
addresses IPADDR, PREFIX, IPADDR1, PREFIX1, ...   List of static IP addresses. Example: IPADDR=10.5.5.23 PREFIX=24 IPADDR1=1.1.1.2 PREFIX1=16
gateway GATEWAY   Gateway IP address. Example: GATEWAY=10.5.5.1
routes ADDRESS1, NETMASK1, GATEWAY1, METRIC1, ...   List of static routes. They are not stored in ifcfg-* file, but in route-* file instead.
ignore-auto-routes PEERROUTES(+) yes PEERROUTES has the opposite meaning as 'ignore-auto-routes' property.
ignore-auto-dns PEERDNS yes PEERDNS has the opposite meaning as 'ignore-auto-dns' property.
dhcp-send-hostname DHCP_SEND_HOSTNAME(+) yes Whether DHCP_HOSTNAME should be sent to the DHCP server.
dhcp-hostname DHCP_HOSTNAME   Hostname to send to the DHCP server. When both DHCP_HOSTNAME and DHCP_FQDN are specified only the latter is used.
never-default DEFROUTE (GATEWAYDEV in /etc/sysconfig/network) yes DEFROUTE=no tells NetworkManager that this connection should not be assigned the default route. DEFROUTE has the opposite meaning as 'never-default' property.
may-fail IPV4_FAILURE_FATAL(+) no IPV4_FAILURE_FATAL has the opposite meaning as 'may-fail' property.
route-metric IPV4_ROUTE_METRIC(+) -1 IPV4_ROUTE_METRIC is the default IPv4 metric for routes on this connection. If set to -1, a default metric based on the device type is used.
dns-priority IPV4_DNS_PRIORITY(+) 0 The priority for DNS servers of this connection. Lower values have higher priority. If zero, the default value will be used (50 for VPNs, 100 for other connections). A negative value prevents DNS from other connections with greater values to be used. Example: IPV4_DNS_PRIORITY=20
dhcp-client-id DHCP_CLIENT_ID(+)   A string sent to the DHCP server to identify the local machine. Example: DHCP_CLIENT_ID=ax-srv-1
dad-timeout ARPING_WAIT missing variable means global default (config override or 3) Timeout (in seconds) for performing DAD before configuring IPv4 addresses. 0 turns off the DAD completely, -1 means default value. Example: ARPING_WAIT=2
dhcp-timeout IPV4_DHCP_TIMEOUT(+)   A timeout after which the DHCP transaction fails in case of no response. Example: IPV4_DHCP_TIMEOUT=10
dhcp-fqdn DHCP_FQDN   FQDN to send to the DHCP server. When both DHCP_HOSTNAME and DHCP_FQDN are specified only the latter is used. Example: DHCP_FQDN=foo.bar.com

Table 71. ipv6 setting

Property Ifcfg-rh Variable Default Description
method IPV6INIT, IPV6FORWARDING, IPV6_AUTOCONF, DHCPV6C IPV6INIT=yes; IPV6FORWARDING=no; IPV6_AUTOCONF=!IPV6FORWARDING, DHCPV6=no Method used for IPv6 protocol configuration. ignore ~ IPV6INIT=no; auto ~ IPV6_AUTOCONF=yes; dhcp ~ IPV6_AUTOCONF=no and DHCPV6C=yes
dns DNS1, DNS2, ...   List of DNS servers. NetworkManager uses the variables both for IPv4 and IPv6.
dns-search DOMAIN   List of DNS search domains.
addresses IPV6ADDR, IPV6ADDR_SECONDARIES   List of static IP addresses. Example: IPV6ADDR=ab12:9876::1 IPV6ADDR_SECONDARIES="ab12:9876::2 ab12:9876::3"
gateway IPV6_DEFAULTGW   Gateway IP address. Example: IPV6_DEFAULTGW=abbe::1
routes (none)   List of static routes. They are not stored in ifcfg-* file, but in route6-* file instead in the form of command line for 'ip route add'.
ignore-auto-routes IPV6_PEERROUTES(+) yes IPV6_PEERROUTES has the opposite meaning as 'ignore-auto-routes' property.
ignore-auto-dns IPV6_PEERDNS(+) yes IPV6_PEERDNS has the opposite meaning as 'ignore-auto-dns' property.
dhcp-hostname DHCP_HOSTNAME   Hostname to send the DHCP server.
never-default IPV6_DEFROUTE(+), (and IPV6_DEFAULTGW, IPV6_DEFAULTDEV in /etc/sysconfig/network) IPV6_DEFROUTE=yes (when no variable specified) IPV6_DEFROUTE=no tells NetworkManager that this connection should not be assigned the default IPv6 route. IPV6_DEFROUTE has the opposite meaning as 'never-default' property.
may-fail IPV6_FAILURE_FATAL(+) no IPV6_FAILURE_FATAL has the opposite meaning as 'may-fail' property.
route-metric IPV6_ROUTE_METRIC(+) -1 IPV6_ROUTE_METRIC is the default IPv6 metric for routes on this connection. If set to -1, a default metric based on the device type is used.
dns-priority IPV6_DNS_PRIORITY(+) 0 The priority for DNS servers of this connection. Lower values have higher priority. If zero, the default value will be used (50 for VPNs, 100 for other connections). A negative value prevents DNS from other connections with greater values to be used. Example: IPV6_DNS_PRIORITY=20
ip6-privacy IPV6_PRIVACY, IPV6_PRIVACY_PREFER_PUBLIC_IP(+) no Configure IPv6 Privacy Extensions for SLAAC (RFC4941). Example: IPV6_PRIVACY=rfc3041 IPV6_PRIVACY_PREFER_PUBLIC_IP=yes Allowed values: IPV6_PRIVACY: no, yes (rfc3041 or rfc4941); IPV6_PRIVACY_PREFER_PUBLIC_IP: yes, no
addr-gen-mode IPV6_ADDR_GEN_MODE eui64 Configure IPv6 Stable Privacy addressing for SLAAC (RFC7217). Example: IPV6_ADDR_GEN_MODE=stable-privacy Allowed values: IPV6_ADDR_GEN_MODE: eui64, stable-privacy
token IPV6_TOKEN   The IPv6 tokenized interface identifier token Example: IPV6_TOKEN=::53

Table 72. macvlan setting

Property Ifcfg-rh Variable Default Description

Table 73. team-port setting

Property Ifcfg-rh Variable Default Description
config TEAM_PORT_CONFIG   Team port configuration in JSON. See man teamd.conf for details.

Table 74. team setting

Property Ifcfg-rh Variable Default Description
config TEAM_CONFIG   Team configuration in JSON. See man teamd.conf for details.

Table 75. tun setting

Property Ifcfg-rh Variable Default Description

Table 76. vlan setting

Property Ifcfg-rh Variable Default Description
parent DEVICE or PHYSDEV   Parent interface of the VLAN.
id VLAN_ID or DEVICE   VLAN identifier.
flags GVRP, MVRP, VLAN_FLAGS   VLAN flags. Allowed values: "yes or "no" for GVRP and MVRP; "LOOSE_BINDING" and "NO_REORDER_HDR" for VLAN_FLAGS
ingress-priority-map VLAN_INGRESS_PRIORITY_MAP   Ingress priority mapping. Example: VLAN_INGRESS_PRIORITY_MAP=4:2,3:5
egress-priority-map VLAN_EGRESS_PRIORITY_MAP   Egress priority mapping. Example: VLAN_EGRESS_PRIORITY_MAP=5:4,4:1,3:7
interface-name PHYSDEV and VLAN_ID, or DEVICE   VLAN interface name. If all variables are set, parent device from PHYSDEV takes precedence over DEVICE, but VLAN id from DEVICE takes precedence over VLAN_ID. Example: PHYSDEV=eth0, VLAN_ID=12; or DEVICE=eth0.12

Table 77. vxlan setting

Property Ifcfg-rh Variable Default Description

Table 78. 802-3-ethernet setting

Property Ifcfg-rh Variable Default Description
port (none)   The property is not saved by the plugin.
speed (none)   The property is not saved by the plugin.
duplex (none)   The property is not saved by the plugin.
auto-negotiate (none)   The property is not saved by the plugin.
mac-address HWADDR   Hardware address of the device in traditional hex-digits-and-colons notation (e.g. 00:22:68:14:5A:05).
cloned-mac-address MACADDR   Cloned (spoofed) MAC address in traditional hex-digits-and-colons notation (e.g. 00:22:68:14:5A:99).
mac-address-blacklist HWADDR_BLACKLIST(+)   It denies usage of the connection for any device whose address is listed. Example: HWADDR_BLACKLIST="00:22:68:11:69:08 00:11:22:11:44:55"
mtu MTU   MTU of the interface.
s390-subchannels SUBCHANNELS   Subchannels for IBM S390 hosts. Example: SUBCHANNELS=0.0.b00a,0.0.b00b,0.0.b00c
s390-nettype NETTYPE   Network type of the S390 host. Example: NETTYPE=qeth Allowed values: "qeth", "lcs" or "ctc"
s390-options OPTIONS and PORTNAME, CTCPROTO,   S390 device options. All options go to OPTIONS, except for "portname" and "ctcprot" that have their own variables.

Table 79. 802-11-wireless-security setting

Property Ifcfg-rh Variable Default Description
key-mgmt KEY_MGMT(+)   Key management menthod. Allowed values: IEEE8021X, WPA-PSK, WPA-EAP
wep-tx-keyidx DEFAULTKEY 1 Index of active WEP key. Allowed values: 1, 2, 3, 4
auth-alg SECURITYMODE(+)   Authentication algorithm for WEP. Allowed values: restricted, open, leap
proto WPA_ALLOW_WPA(+), WPA_ALLOW_WPA2(+) no Allowed WPA protocols, WPA and WPA2 (RSN). Allowed values: yes, no
pairwise CIPHER_PAIRWISE(+)   Restrict pairwise encryption algorithms, specified as a space separated list. Allowed values: CCMP, TKIP
group CIPHER_GROUP(+)   Restrict group/broadcast encryption algorithms, specified as a space separated list. Allowed values: CCMP, TKIP, WEP40, WEP104
leap-username IEEE_8021X_IDENTITY(+)   Login name for LEAP.
wep-key0 KEY1, KEY_PASSPHRASE1(+)   The first WEP key (used in most networks). See also DEFAULTKEY for key index.
wep-key1 KEY2, KEY_PASSPHRASE2(+)   WEP key with index 1. See also DEFAULTKEY for key index.
wep-key2 KEY3, KEY_PASSPHRASE3(+)   WEP key with index 2. See also DEFAULTKEY for key index.
wep-key3 KEY4, KEY_PASSPHRASE4(+)   WEP key with index 3. See also DEFAULTKEY for key index.
wep-key-flags WEP_KEY_FLAGS(+)   Password flags for KEY<i>, KEY_PASSPHRASE<i> password. (see the section called “Secret flag types:” for _FLAGS values)
psk WPA_PSK   Pre-Shared-Key for WPA networks.
psk-flags WPA_PSK_FLAGS(+)   Password flags for WPA_PSK_FLAGS. (see the section called “Secret flag types:” for _FLAGS values) Example: WPA_PSK_FLAGS=user
leap-password IEEE_8021X_PASSWORD(+)   Password for LEAP. It can also go to "key-" lookaside file, or it can be owned by a secret agent.
leap-password-flags IEEE_8021X_PASSWORD_FLAGS(+)   Password flags for IEEE_8021X_PASSWORD_FLAGS. (see the section called “Secret flag types:” for _FLAGS values)
wep-key-type KEY<i> or KEY_PASSPHRASE<i>(+)   KEY is used for "key" type (10 or 26 hexadecimal characters, or 5 or 13 character string prefixed with "s:"). KEY_PASSPHRASE is used for WEP passphrases. Example: KEY1=s:ahoj, KEY1=0a1c45bc02, KEY_PASSPHRASE1=mysupersecretkey

Table 80. 802-11-wireless setting

Property Ifcfg-rh Variable Default Description
ssid ESSID   SSID of Wi-Fi network. Example: ESSID="Quick Net"
mode MODE   Wi-Fi network mode. Allowed values: Ad-Hoc, Managed (Auto) [case insensitive]
band BAND(+)   BAND alone is honored, but CHANNEL overrides BAND since it implies a band. Example: BAND=bg Allowed values: a, bg
channel CHANNEL   Channel used for the Wi-Fi communication. Channels greater than 14 mean "a" band, otherwise the band is "bg". Example: CHANNEL=6
bssid BSSID(+)   Restricts association only to a single AP. Example: BSSID=00:1E:BD:64:83:21
rate (none)   This property is not handled by ifcfg-rh plugin.
tx-power (none)   This property is not handled by ifcfg-rh plugin.
mac-address HWADDR   Hardware address of the device in traditional hex-digits-and-colons notation (e.g. 00:22:68:14:5A:05).
cloned-mac-address MACADDR   Cloned (spoofed) MAC address in traditional hex-digits-and-colons notation (e.g. 00:22:68:14:5A:99).
mac-address-blacklist HWADDR_BLACKLIST(+)   It denies usage of the connection for any device whose address is listed.
seen-bssids (none)   This property is not handled by ifcfg-rh plugin.
mtu MTU   MTU of the wireless interface.
hidden SSID_HIDDEN(+)   Whether the network hides the SSID.
powersave POWERSAVE(+)   Enables or disables Wi-Fi power saving. Example: POWERSAVE=enable Allowed values: default, ignore, enable, disable
mac-address-randomization MAC_ADDRESS_RANDOMIZATION(+)   Enables or disables Wi-Fi MAC address randomization. Example: MAC_ADDRESS_RANDOMIZATION=always Allowed values: default, never, always
security (none)   This property is deprecated and not handled by ifcfg-rh-plugin.

The following settings are not supported by ifcfg-rh plugin:

adsl, bluetooth, ppp, pppoe, serial, generic, gsm, cdma, 802-11-olpc-mesh, wimax, vpn

Secret flags

Each secret property in a NetworkManager setting has an associated flags property that describes how to handle that secret. In the fcfg-rh plugin variables for secret flags have a _FLAGS suffix. The variables contain one or more of the following values (space separated). Missing (or empty) *_FLAGS variable means that the password is owned by NetworkManager.

  • user - a user-session secret agent is responsible for providing and storing this secret; when it is required, agents will be asked to provide it.

  • ask - the associated password is not saved but it will be requested from the user each time it is required.

  • unused - in some situations it cannot be automatically determined that a secret is required or not. This flag hints that the secret is not required and should not be requested from the user.

Files

/etc/sysconfig/network-scripts/ifcfg-*

/etc/sysconfig/network-scripts/keys-*

/etc/sysconfig/network-scripts/route-*

/etc/sysconfig/network-scripts/route6-*

/usr/share/doc/initscripts/sysconfig.txt

See Also

nm-settings(5), nm-settings-keyfile(5), NetworkManager(8), NetworkManager.conf(5), nmcli(1), nmcli-examples(7)